 |
|
|
| PROCAP I & II capacitance probes offer interference-free, fail-safe operation & "Quick-Set" calibration. BinMaster’s capacitance sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. BinMaster PROCAP I & II capacitance probes provide interference-free operation – working far below the RF level of 9 KHz at just 6 KHz. – and will not interfere with two-way radios or other equipment operating in the radio spectrum. Class II hazardous location ratings and a wide assortment of probes and extensions make these capacitance probes appropriate for a variety of solid, liquid and slurry materials. |
|
 |
|
|
| PROCAP IX & IIX capacitance sensors are designed for use in hazardous locations, featuring CSA Class I, Groups C & D and Class II, Groups E,F & G ratings. They are suitable for challenging environments where there is a risk of explosion, detecting high and low levels in bins, silos, tanks, hoppers, chutes and other vessels used for volatile material storage or process manufacturing. These intrinsically safe capacitance probes provide interference-free operation – working far below the RF level of 9 KHz at just 6 KHz. – and will not interfere with two-way radios or other equipment operating in the radio spectrum. |
|
 |
|
| PROCAP I 3-A & II 3-A |
View |
|
| The PROCAP I 3-A & II 3-A meet rigorous USDA, FDA and 3-A material and design standards for sanitary food and dairy processing. They can be used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for the storage or manufacture of food or dairy products. They operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air. They feature a Class II hazardous location rating and are available with a wide assortment of probes and extensions to meet a variety of processing needs |
|
 |
|
|
| The PROCAP I-FL & II-FL offer “no probe intrusion” and are designed for space constrained areas or applications where material flow or bridging may damage a standard probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of the bottom of the FL serves as the capacitance sensor which features Pro-Shield compensation for material build up and an adjustable time delay of up to 30 seconds to ensure accurate readings. The screw-cap enclosure offers easy access to components, which is especially handy in space-constrained installations.
|
|
 |
|
|
| Pro Auto-Cal offers simple and automatic calibration and external testing without having to remove the cover of the unit. Calibration takes just seconds and is performed with the use of a special magnet. This unit also allows for the simulation of either a covered or uncovered condition without accessing the probe assembly or the electronics. A visual LED on the top of the housing indicates sensor status, while temperature-stable calibration and an adjustable time delay of up to 10 seconds allows for settling of material to ensure the most accurate readings.
|
|
 |
|
|
| The Pro Remote capacitance sensor features remote electronics located in a housing that is separated from the probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity. It offers simple, "Quick-Set" calibration and adjustable sensitivity to less than one picofarad, making it highly reliable in a variety of powders, solids, liquids and slurries |
|
 |
|
|
| Compact Pro is a compact capacitance probe for reliable level measurement and plugged chute detection for liquid, powder, granular, and pelleted materials. This probe is designed for tight spaces where proximity switches will not work and is appropriate for use in tanks, bins, silos, chutes, conveyors, pipes and load out hoppers. It features four levels of static discharge protection, which is important for pneumatically conveyed materials |
|
 |
|
| Point Level Alarm Panel |
View |
|
| The BinMaster Point Level Alarm Panel is designed to alert the user to vessel level conditions via a blinking LED light and an audible alarm, saving time and eliminating the need to manually inspect vessel levels. Level indicators – such as a diaphragm switch, rotary paddle, tilt switch, capacitance probe or vibrating rod – are placed strategically at desired points in each vessel, enabling the user to be automatically notified when a bin reaches a full, partially full, or empty level.
|
|
|
